磺酰脲类除草剂的微生物降解研究进展

磺酰脲类除草剂属于高效、低毒、高选择性的新型除草剂,被广泛应用于水稻、玉米、小麦、大豆等田间杂草的防控,其用量也呈逐年增加的趋势,但其微量的除草剂残留易对后茬敏感作物产生药害.利用微生物降解土壤中的除草剂残留有望成为一种修复污染的有效方法.本文综述了近几年国内外筛选出的能够降解磺酰脲类除草剂菌株的来源和所属微生物类群,以及除草剂降解酶的研究进展,此外,对相关微生物对不同除草剂的降解途径也进行了简要介绍,最后提出了目前有待解决的问题并对未来该领域的研究趋势进行了展望,可为后续寻找高效的微生物降解菌种及利用基因工程法修复受污染的土壤、水源提供参考.     

电驱动功率模块微纳米尺度加工新技术及应用

电驱动功率模块能够采用的一种微纳米尺度加工新技术是聚焦离子束,该技术对半导体器件能够进行微区溅射与增强刻蚀,能够在分辨率优于0.1 nm条件下对样品特定微区进行无需掩模的精确刻蚀;能够对样品表面进行薄膜沉积,便于裸芯片截面加工、导电性差或不导电样品的SEM形貌观察;能够进行裸芯片截面加工及观察,有效结合裸芯片截面研磨工艺实现三代半导体材料工艺器件截面加工技术的全覆盖;能够进行半导体材料改性及器件研制,具有无需掩模版和感光胶层并简化工艺流程等优点。     

高瓦斯工作面隅角柔性气囊安全封堵研究

为解决高瓦斯工作面隅角封堵工人劳动强度大、效率低,封堵效果不佳易造成隅角瓦斯浓度超限等安全问题,研发设计了矿用阻燃内外胆组合结构的轻型柔性隅角封堵气囊,并相应提出了单体液压支柱配合轻型柔性气囊的隅角封堵新方法。通过实验室测试实验和现场工业性试验表明:选用PVC材料和双抗涂覆布材料的气囊质量小、轻便实用,大幅降低了工人的劳动强度,提高了工作效率,减小了传统封堵方式编织袋装碎煤造成的遗煤浪费;该气囊可适应大变形(变形率可达42.5%)、耐冲击(2×104J的冲击能量不破坏),抗撕扯能力强,且具有阻燃特性,重复使用率高,大大节约了隅角封堵的成本;使用气囊封堵后,采空区内瓦斯浓度显著增大,说明气囊封堵的密闭性增加,安全封堵效果十分明显。     

危险品集装箱堆场人因失误概率量化方法研究

由于人因失误是引发危险品集装箱堆场事故的主要原因,特别以成功似然指数法为框架研究了危险品集装箱堆场人因失误概率的量化方法。考虑了影响因子的主观特性,重点结合认知可靠性与失误分析方法对成功似然指数法进行修正,确定了培养与组织管理、同时出现的目标数量等6项行为形成因子。通过建立熵权法、模糊集合理论与专家判断的融合实现人因失误概率的计算。最后,用算例验证了方法的有效性,结果表明,本方法不但可将测算精度控制在有效区间(0,0.059 5),而且相较其他方法将危险系数降低了6.97%。针对危险品集装箱堆场管理这类高危行业,较高的人因失误率有利于风险辨识和风险预防。     

CWPO体系中污泥炭催化降解头孢氨苄废水

通过加入正丁醇以共沸蒸馏法对剩余污泥进行脱水,再对污泥进行干燥、焙烧和改性得到污泥炭催化剂.将污泥炭催化剂用于催化湿式过氧化氢氧化体系,处理头孢氨苄废水.采用响应面法中的中心组合设计实验,考察反应温度、初始pH和过氧化氢投加量对TOC降解率的影响,反应温度和过氧化氢投加量具有显著交互作用.在最佳实验条件下(T=50℃、pH=3.00、H_2O_2=0.071 mol·L~(-1)),TOC去除率为59%,接近预测的TOC去除率(60%),在95%的置信区间内,说明该模型可靠.SEM、TEM、TPD-MS、XPS和FT-IR等分析结果表明污泥炭表面存在纳米尺寸片状结构,这种结构中存在酚羟基、羰基、羧基等活性官能团和醌类结构,且ICP-OES、EDAX和~(57)Fe穆斯堡尔谱等分析结果表明,污泥炭中含有不同价态的Fe,能有效地催化过氧化氢分解,将头孢氨苄转化为苯甲酸、丁二酮等小分子物质,再进一步完全氧化.     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.     

硫化锰纳米颗粒高效去除重金属镉

中国镉污染问题日益严峻,开发高效的镉吸附剂,是解决环境镉污染问题的重要技术手段。采用共沉淀方法合成了硫化锰纳米颗粒,研究了其对重金属镉的吸附行为,并采用X射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HR-TEM)、比表面积(BET)等技术手段探究了硫化锰纳米颗粒的形貌、化学组分以及镉的去除机制。结果表明,MnS纳米颗粒呈球状,平均粒径100 nm,比表面积30.56 m~2·g~(-1)。MnS纳米颗粒对Cd~(2+)的吸附动力学数据较好地符合伪二级动力学模型;吸附等温线数据较好地符合Langmuir模型,说明MnS对Cd2+的吸附是以化学吸附为主的单分子层吸附。使用Langmuir拟合的MnS饱和最大镉吸附量为349.6 mg·g~(-1),在众多镉吸附材料中处于前列。对于模拟工厂重金属废水的处理,MnS纳米颗粒可以在5 h内使镉的浓度由60 mg·L~(-1)降至国家规定排放线以下(0.1 mg·L~(-1)),且吸附过程中水体pH稳定,对水体干扰小。在多种重金属离子共存的情况下,仍可以达到接近100%的Cd~(2+)去除率。硫化锰相对稳定,在空气中放置30 d仍有80%的镉去除率。较高的离子交换量形成CdS沉淀是MnS高效去除镉的主要原因。     

铁路沿线可燃重气储罐最小隔离区域划分探讨*

为保护铁路线，以某化工厂距离高铁路线最近的丙烯球罐为例，提出丙烯球罐泄漏最小隔离区域划分方法以及2种保护高铁线路方案，利用重气扩散模型和定量风险评价（QRA）软件分别进行丙烯扩散模拟、爆炸模拟，并进行危险与可操作性分析（HAZOP）和保护层分析（LOPA）。结果表明:球罐发生泄漏及火灾爆炸等事故，会给附近铁路线带来严重破坏；丙烯泄漏或球罐因周围其他设备设施或可燃物质着火而温度升高时，保护措施不足；隧道的安全可靠性要高于仅设1道防爆墙，隧道长度需覆盖最小隔离区域的可及范围，在扩散区域内也需设立普通挡墙，在极度危险情况下，需要实施高铁停开等保护措施。     

综合管廊内火灾自动报警探测器实验研究

为了能够有效提升综合管廊内火灾自动报警系统的准确性和可靠性,本文采用火灾实体试验的方法,通过对各类型火灾自动报警探测器响应时间的情况进行分析和比较,研究综合管廊电力舱内常用探测器的性能。研究结果表明:接触式缆式线型感温火灾探测器可以较早的探测到电缆温度异常变化的现象,可用于早期预警。点型感烟探测器对烟粒子浓度较为敏感,可用于综合管廊电力舱室的空间探测。分布式光纤型感温火灾探测器对明火温度的变化较为敏感,作为空间型的火灾探测器比较可靠。